Driven Media GR Corolla Headlight Side Marker Overlay

The GR Corolla headlights come with an orange side marker built in that sticks out like a sore thumb. These overlays allow you to mask that orange, getting rid of the eye sore, and giving the side profile of the car a much more clean and sleek appearance while still allowing the reflector to work correctly. 

These overlays are designed and cut in-house using high-quality vinyl to ensure proper fit and finish. 

• Features air release technology for incredibly easy installation
• Made in the USA.
• Sold as a pair

Options

• Dark Smoke - If you want to mute the orange of the side marker as much as possible while still maintaining the functionality of the reflector, the dark smoke option is going to be your best bet. It helps to blend the side marker in with the rest of the black housing to create a sleek and cohesive unit throughout the headlight.
• Light Smoke - If you’re just wanting to tone down the vibrant orange of the side marker and you’re looking for a subtle OEM+ appearance then the light smoke option is for you. You’ll still be able to see the orange hue of the side marker come through, but it’s not as unappealing as it would be without the overlay.

Installation Instructions for DARK SMOKE & LIGHT SMOKE (Dry Application)

• Note: The front of the overlays is indicated by the location of the “L” and “R” so make sure to pay attention to the orientation.

• Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.

• Carefully peel the overlay off of the backing and use the bottom edge of the headlight to line it up to cover the orange side marker. There is a line in the lens of the headlight that is approximately 1/4” away from the edge that you can use as a guide.

• Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles. Use of a heat gun can help to ensure you don’t get any wrinkles when installing the overlay

• We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

• The temperature needs to be a minimum of 65°F for proper application