Driven Media GR86 / BRZ Carbon Fiber Mirror Covers
If you’re looking to add a touch of carbon fiber to the exterior of your car, the mirror caps are the perfect place to start! The Driven Media Carbon Fiber Mirror Covers fit right over your OEM mirrors and contour the curved shape to perfection. These will tie in with any other carbon fiber bits you have installed on the car and give it that premium styling. Spice up the exterior of the car with these carbon fiber mirror caps. They add a unique touch and there’s nothing quite like when the light hits the carbon weave just right!
Prior to installing the carbon fiber cover, make sure the surface is thoroughly cleaned and dry.
Carefully peel the backing off of the double sided tape on the back of the cover.
Place the cover into position and press it onto the OEM unit applying constant pressure for at least 30 seconds.
The recommended ambient temperature for install is 70°F - 90°F to ensure proper adhesion.
Allow the adhesive to cure for 48hrs before washing the car.
