Driven Media GR86/BRZ F1 Blinking Module

Driven Media GR86/BRZ F1 Blinking Module

The 2022+ GR86 & BRZ are small cars that sit a bit lower than your average car on the road. With how many distracted drivers there are on the streets you want to do everything you can to improve your visibility to others. With the Driven Media F1 Blinking Module you can turn your OEM 3rd brake light into a F1 blinking brake light so that those behind you know you’re slowing down or coming to a stop. After a few quick blinks it returns to a solid brake light as to not annoy drivers around you. It utilizes OE style connectors to make installation plug and play in under 5 minutes with no splicing or modification to your OEM light necessary. Don’t hassle with changing out your 3rd brake light and risking burnt out LEDs or condensation when you can easily turn your OEM 3rd brake light into an F1 blinking brake light with our module that installs within 5 minutes. All you need is a flathead to pop out the clips holding your trunk liner in place and then plug this in!

Installation Instructions

• Remove the seven push clips that hold your trunk liner in place and set the liner aside.

• Unplug the white connection for the 3rd brake light on the DRIVER side. *Take care not to mix this up with the connection on the passenger side*

• Plug the F1 Blinking Module into the corresponding connectors (they can only go in one way).

• Have someone hop in the car to test and make sure everything is working properly.

• If all is good, reinstall your trunk liner and push clips and you’re good to go!

• If desired, you can zip tie any slack to minimize the risk of rattling.