Driven Media GR86 / BRZ Front Sidemarker Overlay
Driven Media GR86 / BRZ Front Sidemarker Overlay
Driven Media GR86 / BRZ Front Sidemarker Overlay
Driven Media GR86 / BRZ Front Sidemarker Overlay
Driven Media GR86 / BRZ Front Sidemarker Overlay

Driven Media GR86 / BRZ Front Sidemarker Overlay

Regular price$11.99
/
Shipping calculated at checkout.

Select Color
  • FREE DOMESTIC SHIPPING ON ORDERS OVER $199

OEM 2022+ GR86 and BRZ front sidemarkers are an unappealing orange color that sticks out like a sore thumb. These overlays allow you to mask that orange, getting rid of the eye sore, and giving the side profile of your car a much more clean and sleek appearance while still allowing the light to shine brightly through.

These overlays are designed and cut in-house using high-quality vinyl to ensure proper fit and finish.

Dark Smoke

The dark smoke option allows you to completely black out the sidemarkers on the car while still maintaining the reflective nature and allowing the light to shine through so you retain your visibility to others.

Light Smoke

With the light smoke option, you drastically tone down the orange of the sidemarker making it less of an eye sore and allowing other parts of your car to shine without disruption. You still maintain the reflective nature of the sidemarker and the light can clearly shine through the overlay to retain visibility to others.

Installation Instructions for DARK SMOKE & LIGHT SMOKE (Dry Application)

  • Prior to applying the overlay, make sure the surface is thoroughly cleaned and dry.

  • Carefully peel the overlay off of the backing and use the bottom edge of the sidemarker to line it up and then slowly follow the front edge of the sidemarker until you get to the top. *The vinyl is very pliable so you can stretch it for a perfect fit if needed*

  • When you have the overlay installed on the face of the sidemarker you can then wrap the back edge around the curve making sure not to leave an edges lifted.

  • Once you have successfully positioned the overlay where you want it, use a vinyl squeegee or microfiber to remove any air bubbles.

  • We recommend allowing at least 48hrs before washing the car to allow for the adhesive to cure and avoid directly spraying them with a pressure washer.

  • The temperature needs to be a minimum of 65°F for proper application.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.